Vision Spinner III – 1600 mah
Out of stock
Vision Spinner 3S 1600MAH vape pen battery with regulated power. Compatible with 510-threaded attachments, Vision Spinner 3S lets you power up your favorite tanks with long-lasting battery life. Vision Spinner 3 VV battery allow you to regulate the power between 3.6 and 4.8 volts if you like to control your vapor clouds. Power Vision Spinner 3 S battery on or off with five clicks, and to regulate with the wheel regulator. 8 seconds overheat protection will turn the Vision Spinner 3S battery off after 10 seconds, and overcharge protection keeps the battery from overheating while it charges. The 1600mAh Vision Spinner 3S variable voltage battery is ideal for vaping on-the-go.
Compatible with all standard 510 and eGo devices!
Upgraded and stable PCB control head!
Longer life span for the new upgraded PCB and battery cell!
Long lasting 1600mAh battery!
5-click on/off switch
510 and eGo Thread
Variable Voltage Wheel
Over 500 Charging Cycles
Output Voltage: 3.6~4.8v
What you get:
1x Vision Spinner 3S 1600MAH battery
The battery is turned on/off by pressing the button five times in two second.
When the battery is off, the button flashes three times in mixed color to indicate that battery is activated after pressing the button five times in two second.
When the battery is on, the button flashes three times in mixed color to indicate that battery is off after pressing the button five times in two seconds.
Spinner IIIS could display three colors from the button to indicate the battery usage level.
If the button displays WHITE color being pressed when battery is on, it indicates a remaining 60%-100% battery power.
If the button displays BLUE color being pressed when battery is on, it indicates a remaining 30%-60% battery power.
If the button displays ORANGE color being pressed when battery is on, it indicates a remaining 0%-30% battery power
The button flashes fifteen times in mixed color to indicate that there is no power at all left in battery and it can no longer function without being properly charge.
Charging time – Spinner 3S, for its large capacity of 1600mA, requires about 5-6 hours to be fully recharged if the the battery has no power at all.
Short circuit protection – when battery is on, in case of a short circuit which usually happens if the user operates wrongly during installing a atomizer onto the battery or connecting USB charger to the battery, the button flashes three times and stop working temporarily until the conditions causing short circuit are remove.
Working time protection – when battery is on, in case of pressing the button non-stop for more than eight seconds, the button flashes five times and shut down the output instantly.